Measuring Tools

Showing 2617–2640 of 3423 resultsSorted by latest

• 

  ALUMINUM LEVELS, 32″

  Part #: 4914-800
  • Accuracy .006in/ft Shockproof horizontal and vertical vials.
  • Magnetic base.
  • Shock absorbing rubber end caps.
  • Working temperature: 5°F ~ 131°F
  $90.88
  Add to cart INSIZE
• 

  DIGITAL LEVELS AND SLOPE METERS, 0-360°(90 °×4)

  Part #: 4910-400
  • With transverse and longitudinal vials Used as level and slope meter to measure the angle of two separate surfaces Aluminum frame Magnetic bottom The sea level is permanently set inside the chip, zero setting is not needed when batteries are replaced Buttons: ON/OFF, absolute and incremental measurement, keep the reading, buzzer alarm(not for 4910-400), unit (mm/m, %, in/ft), conversion(not for 4910-400), backlight The display flips over when the bottom faces up Two AAA batteries. Automatic power off.
  $134.51
  Add to cart INSIZE
• 

  MINI LEVEL, 3.9″

  Part #: 4908-100
  • Sensitivity .0012in/ft (=0.0057°) No need to set zero before use.
  • With mounting holes (for M5 screw).
  $786.40
  Add to cart INSIZE
• 

  FRAME LEVEL, 8×8″

  Part #: 4906-200
  • Sensitivity .0024in/ft (=0.001°) No need to set zero before use.
  • Three V-grooves for shafts (shafts diameter .76~4.56").
  • With longitudinal vial.
  $3,382.75
  Add to cart INSIZE
• 

  FRAME LEVEL, 6×6″

  Part #: 4906-150
  • Sensitivity .0024in/ft (=0.001°) No need to set zero before use.
  • Three V-grooves for shafts (shafts diameter .76~4.56").
  • With longitudinal vial.
  $2,786.91
  Add to cart INSIZE
• 

  BLOCK LEVEL, 12″

  Part #: 4905-300
  • Sensitivity .00024in/ft (=0.001°) No need to set zero before use.
  • V-groove on bottom for shafts (shafts diameter .76~4.56").
  • With longitudinal vial.
  $2,088.14
  Add to cart INSIZE
• 

  BLOCK LEVEL, 8″

  Part #: 4905-200
  • Sensitivity .00024in/ft (=0.001°) No need to set zero before use.
  • V-groove on bottom for shafts (shafts diameter .76~4.56").
  • With longitudinal vial.
  $1,748.37
  Add to cart INSIZE
• 

  BLOCK LEVEL, 6″

  Part #: 4905-160
  • Sensitivity .00024in/ft (=0.001°) No need to set zero before use.
  • V-groove on bottom for shafts (shafts diameter .76~4.56").
  • With longitudinal vial.
  $1,479.30
  Add to cart INSIZE
• 

  FRAME LEVEL, 8×8″

  Part #: 4902-8
  • Sensitivity .00024in/ft (=0.001°) V-groove on bottom and left for shafts (shafts diameter .59~2.76").
  • With transverse vial.
  • Supplied with adjusting wrench
  $514.89
  Add to cart INSIZE
• 

  FRAME LEVELS, 12×12″

  Part #: 4902-12
  • Sensitivity .00024in/ft (=0.001°) V-groove on bottom and left for shafts (shafts diameter .59~2.76").
  • With transverse vial.
  • Supplied with adjusting wrench
  $660.40
  Add to cart INSIZE
• 

  BLOCK LEVEL, 6″

  Part #: 4901-6
  • Sensitivity .00024in/ft (=0.001°) V-groove on bottom for shafts (shafts diameter .63~2.76") With transverse vial Supplied with adjusting wrench
  $380.47
  Add to cart INSIZE
• 

  BLOCK LEVEL, 12″

  Part #: 4901-12
  • Sensitivity .00024in/ft (=0.001°) V-groove on bottom for shafts (shafts diameter .63~2.76") With transverse vial Supplied with adjusting wrench
  $498.77
  Add to cart INSIZE
• 

  TAPER BORE GAGE, range 1.2-1.8″

  Part #: 4852-E30
  • Graduation .005" Quick measurement of bore diameter Hardened carbon steel, HRC50-58 Satin chrome plated surface Aluminium oxided handle
  $307.27
  Add to cart INSIZE
• 

  DIGITAL WELDING GAGE

  Part #: 4831-20A
  • Resolution .0005"/0.01mm Buttons: zero, in/mm, on/off.
  • Battery LR44.
  • Made of stainless steel.
  • Electronic Welding Gage
  $249.34
  Add to cart INSIZE
• 

  WELDING GAGE

  Part #: 4830-E
  • Graduation: 1/128" Made of stainless steel.
  • Stain chrome plated reading surface.
  $91.81
  Add to cart INSIZE
• 

  PITCH GAGE, 4-62TPI

  Part #: 4820-328
  • Check the pitch of screw thread.
  • Accuracy: ±.0028".
  • Quantity of leaves: 28 Made of medium carbon steel
  $56.46
  Add to cart INSIZE
• 

  RADIUS GAGE SET, 0.5-13mm

  Part #: 4804-26
  • Each piece has 3 concave and 2 convex gauging surfaces.
  • 26 Leaves, Accuracy +/- .05mm With Handle in Case .5mm to .13mm
  $130.37
  Add to cart INSIZE
• 

  RADIUS GAGE, 17/64″-1/2″

  Part #: 4801-16E
  • Radius Gage Set Range 17/64" to 1/2" 16 Internal Leaves and 16 External Leaves Accuracy +/- .0014 Made of medium carbon steel
  $71.73
  Add to cart INSIZE
• 

  PROTRACTOR, 5.9×7.9″, 0-180°

  Part #: 4799-1150
  • Graduation 1° Made of stainless steel Satin chrome plated scale.
  • With clamping screw.
  $113.63
  Add to cart INSIZE
• 

  PROTRACTOR, 11.8×23.6″, 10-170°

  Part #: 4797-300
  • Graduation 1° Made of carbon steel.
  • Satin chrome plated.
  • With clamping screw.
  • The blade is moveable.
  $231.04
  Add to cart INSIZE
• 

  PROTRACTOR, 9.8×19.7″, 10-170°

  Part #: 4797-250
  • Graduation 1° Made of carbon steel.
  • Satin chrome plated.
  • With clamping screw.
  • The blade is moveable.
  $195.20
  Add to cart INSIZE
• 

  PROTRACTOR, 7.9×15.7″, 10-170°

  Part #: 4797-200
  • Graduation 1° Made of carbon steel.
  • Satin chrome plated.
  • With clamping screw.
  • The blade is moveable.
  $139.28
  Add to cart INSIZE
• 

  90° BEVELED EDGE SQUARE WITH WIDE BASE, 2.0×1.6″

  Part #: 4795-50
  • DIN875 grade 0.
  • Beveled edges for inside and outside measurement.
  • Made of hardened stainless steel.
  $119.20
  Add to cart INSIZE
• 

  90° BEVELED EDGE SQUARE WITH WIDE BASE, 3.9×2.8″

  Part #: 4795-100
  • DIN875 grade 0.
  • Beveled edges for inside and outside measurement.
  • Made of hardened stainless steel.
  $184.34
  Add to cart INSIZE