Calipers

Showing 49–72 of 272 resultsSorted by latest

• 

  DIGITAL CALIPER WITH KNIFE EDGE LOWER JAWS, 0-8″/0-200mm

  Part #: 1532-200
  • Resolution .0005"/0.01mm Measure diameter of narrow grooves Buttons: on/off, zero, inch/mm Automatic power off, move the digital unit to turn on power Battery CR2032. Data output.
  • Made of stainless steel Optional accessory: data output cable
  $631.75
  Add to cart INSIZE
• 

  DIGITAL CALIPER WITH INTERCHANGEABLE POINTS, 0-12″/0-300mm

  Part #: 1530-300
  • Resolution .0005"/0.01mm Supplied with 4 pairs of points and zero setting block for external measurement Buttons: on/off, set, mm/inch, preset (+, -) Automatic power off, move the digital unit to turn on power Battery CR2032. Data output.
  • Made of stainless steel Optional accessory: points, depth stop(part no. 6143)
  $811.63
  Add to cart INSIZE
• 

  DIGITAL V TYPE CALIPER, 2-8″/50-200mm, 5 flutes

  Part #: 1529-5
  • Resolution .0005"/0.01mm Measure the outside diameter of number of flutes (such as taps, reamers, end mills and gears) Direct reading, calculation is not required Buttons: mm/inch, on/off, origin set Battery LR44, automatic power off. After automatic power off, move the digital unit to turn on power Data output Made of stainless steel Optional accessory: 50mm (1.9685") calibration cylinder (part no. 6316-50), data output cable
  $1,302.80
  Add to cart INSIZE
• 

  DIGITAL V TYPE CALIPER, 2-8″/50-200mm, 31 flutes

  Part #: 1529-31
  • Resolution .0005"/0.01mm Measure the outside diameter of number of flutes (such as taps, reamers, end mills and gears) Direct reading, calculation is not required Buttons: mm/inch, on/off, origin set Battery LR44, automatic power off. After automatic power off, move the digital unit to turn on power Data output Made of stainless steel Optional accessory: 50mm (1.9685") calibration cylinder (part no. 6316-50), data output cable
  $1,307.41
  Add to cart INSIZE
• 

  DIGITAL V TYPE CALIPER, 2-8″/50-200mm, 23 flutes

  Part #: 1529-23
  • Resolution .0005"/0.01mm Measure the outside diameter of number of flutes (such as taps, reamers, end mills and gears) Direct reading, calculation is not required Buttons: mm/inch, on/off, origin set Battery LR44, automatic power off. After automatic power off, move the digital unit to turn on power Data output Made of stainless steel Optional accessory: 50mm (1.9685") calibration cylinder (part no. 6316-50), data output cable
  $1,309.45
  Add to cart INSIZE
• 

  DIGITAL V TYPE CALIPER, 2-8″/50-200mm, 19 flutes

  Part #: 1529-19
  • Resolution .0005"/0.01mm Measure the outside diameter of number of flutes (such as taps, reamers, end mills and gears) Direct reading, calculation is not required Buttons: mm/inch, on/off, origin set Battery LR44, automatic power off. After automatic power off, move the digital unit to turn on power Data output Made of stainless steel Optional accessory: 50mm (1.9685") calibration cylinder (part no. 6316-50), data output cable
  $1,307.09
  Add to cart INSIZE
• 

  DIGITAL CALIPER WITH INTERCHANGEABLE BALL TIPS, (.5″+D)~12″, ball tips are optional

  Part #: 1528-3001
  • Resolution .0005"/0.01mm Buttons: on/off, set, inch/mm, preset (+, -).
  • Automatic power off, move the digital unit to turn on power.
  • Battery CR2032, data output.
  • Made of stainless steel.
  • Optional accessory: ball tips
  $529.00
  Add to cart INSIZE
• 

  DIGITAL CALIPER WITH INTERCHANGEABLE BALL TIPS, (.5″+D)~12″, (with ball 1/16″, 3/16″, 1/8″, 1/4″, 3/8″, 1/2″)

  Part #: 1528-300
  • Resolution .0005"/0.01mm Buttons: on/off, set, inch/mm, preset (+, -).
  • Automatic power off, move the digital unit to turn on power.
  • Battery CR2032, data output.
  • Made of stainless steel.
  • Optional accessory: data output cable.
  $735.73
  Add to cart INSIZE
• 

  DIGITAL CALIPER WITH INTERCHANGEABLE BALL TIPS, (7/8″+D)~12″, ball tips are optional

  Part #: 1527-3001
  • Resolution .0005"/0.01mm Buttons: on/off, set, inch/mm, preset (+, -).
  • Automatic power off, move the digital unit to turn on power.
  • Battery CR2032.
  • Data output.
  • Made of stainless steel.
  • Optional accessory: ball tips
  $517.34
  Add to cart INSIZE
• 

  DIGITAL CALIPER WITH INTERCHANGEABLE BALL TIPS, (7/8″+D)~12″, (with ball 1/16″, 3/16″, 1/8″, 1/4″, 3/8″, 1/2″)

  Part #: 1527-300
  • Resolution .0005"/0.01mm Buttons: on/off, set, inch/mm, preset (+, -).
  • Automatic power off, move the digital unit to turn on power.
  • Battery CR2032, data output.
  • Made of stainless steel.
  • Optional accessory: data output cable.
  $675.43
  Add to cart INSIZE
• 

  DIGITAL CENTERLINE/EDGE TO CENTER CALIPER, Range of upper jaw (edge to center): .6-60″/15.5-1500mm, Range of lower jaw (center to center): 1.2-60″/30.5-1500mm

  Part #: 1525-1500E
  • Resolution: .0005"/0.01mm.
  • Measure hole center distance or edge to hole center distance.
  • Buttons: on/off, set, inch/mm, preset (+, -).
  • Automatic power off, move the digital unit to turn on power.
  • Battery CR2032, data output.
  • Made of stainless steel.
  • Optional accessory: data output cable.
  $4,436.79
  Add to cart INSIZE
• 

  DIGITAL CENTERLINE/EDGE TO CENTER CALIPER, Range of upper jaw (edge to center): .6-40″/15.5-1000mm, Range of lower jaw (center to center): 1.2-40″/30.5-1000mm

  Part #: 1525-1000E
  • Resolution: .0005"/0.01mm.
  • Measure hole center distance or edge to hole center distance.
  • Buttons: on/off, set, inch/mm, preset (+, -).
  • Automatic power off, move the digital unit to turn on power.
  • Battery CR2032, data output.
  • Made of stainless steel.
  • Optional accessory: data output cable.
  $2,787.93
  Add to cart INSIZE
• 

  WIRELESS ELECTRONIC CENTERLINE/EDGE TO CENTER CALIPER, .4-20″/10.5-500mm, .0005″/0.01mm

  Part #: 1525-500EWL
  • Resolution: .0005"/0.01mm.
  • Measure hole center distance or edge to hole center distance.
  • Buttons: on/off, set, inch/mm, preset (+, -).
  • Automatic power off, move the digital unit to turn on power.
  • Battery CR2032.
  • Made of stainless steel.
  $2,269.39
  Add to cart INSIZE
• 

  WIRELESS ELECTRONIC CENTERLINE/EDGE TO CENTER CALIPER, .2-12″ /5.5-300mm, .0005″/0.01mm

  Part #: 1525-300EWL
  • Resolution: .0005"/0.01mm.
  • Measure hole center distance or edge to hole center distance.
  • Buttons: on/off, set, inch/mm, preset (+, -).
  • Automatic power off, move the digital unit to turn on power.
  • Battery CR2032.
  • Made of stainless steel.
  $1,023.41
  Add to cart INSIZE
• 

  DIGITAL CENTERLINE/EDGE TO CENTER CALIPER, Range of upper jaw (edge to center): .4-20″/10.5-500mm, Range of lower jaw (center to center): .8-20″/20.5-500mm

  Part #: 1525-500E
  • Resolution: .0005"/0.01mm.
  • Measure hole center distance or edge to hole center distance.
  • Buttons: on/off, set, inch/mm, preset (+, -).
  • Automatic power off, move the digital unit to turn on power.
  • Battery CR2032, data output.
  • Made of stainless steel.
  • Optional accessory: data output cable.
  $1,871.23
  Add to cart INSIZE
• 

  DIGITAL CENTERLINE/EDGE TO CENTER CALIPER, Range of upper jaw (edge to center): .2-12″ /5.5-300mm, Range of lower jaw (center to center): .4-12″/10.5-300mm

  Part #: 1525-300E
  • Resolution: .0005"/0.01mm.
  • Measure hole center distance or edge to hole center distance.
  • Buttons: on/off, set, inch/mm, preset (+, -).
  • Automatic power off, move the digital unit to turn on power.
  • Battery CR2032, data output.
  • Made of stainless steel.
  • Optional accessory: data output cable.
  $798.81
  Add to cart INSIZE
• 

  DIGITAL CENTERLINE/EDGE TO CENTER CALIPER, 10-300mm/.4-12″

  Part #: 1525-3001
  • Resolution: 0.01mm/.0005".
  • Measure hole center distance or edge to hole center distance.
  • Buttons: on/off, set, inch/mm, preset (+, -).
  • Automatic power off, move the digital unit to turn on power.
  • Battery CR2032, data output.
  • Made of stainless steel.
  • Optional accessory: data output cable.
  $896.26
  Add to cart INSIZE
• 

  WIRELESS DIGITAL BACK-JAW EDGE TO CENTER CALIPER, .2-12″/5.5-300mm, .0005″/0.01mm

  Part #: 1524-300EWL
  • Resolution: .0005"/0.01mm.
  • Measure edge to hole center distance.
  • Buttons: on/off, set, inch/mm, preset (+, -).
  • Automatic power off, move the digital unit to turn on power.
  • Battery CR2032, data output.
  • Made of stainless steel.
  $925.64
  Add to cart INSIZE
• 

  DIGITAL BACK-JAW EDGE TO CENTER CALIPER, .2-12″/5.5-300mm

  Part #: 1524-300E
  • Resolution: .0005"/0.01mm.
  • Measure edge to hole center distance.
  • Buttons: on/off, set, inch/mm, preset (+, -).
  • Automatic power off, move the digital unit to turn on power.
  • Battery CR2032, data output.
  • Made of stainless steel.
  $783.18
  Add to cart INSIZE
• 

  WIRELESS ELECTRONIC CALIPER, 0-12″/0-300mm, .0005″/0.01mm

  Part #: 1523-127WL
  • Resolution: .0005"/0.01mm.
  • Buttons: on/off, zero, inch/mm.
  • Automatic power off, move the digital unit to turn on power.
  • Battery CR2032.
  • Data output.
  • Made of stainless steel.
  $719.46
  Add to cart INSIZE
• 

  WIRELESS ELECTRONIC CALIPER, 0-12″/0-300mm, .0005″/0.01mm

  Part #: 1522-127WL
  • Resolution: .0005"/0.01mm.
  • Buttons: on/off, zero, inch/mm.
  • Automatic power off, move the digital unit to turn on power.
  • Battery CR2032.
  • Data output.
  • Made of stainless steel.
  $532.29
  Add to cart INSIZE
• 

  DIGITAL INSIDE GROOVE CALIPER, .43-6″/11-150mm, built-in wireless

  Part #: 1520-150WL
  • Resolution: .0005"/0.01mm.
  • Measure diameter of grooves inside small bores.
  • Buttons: on/off, set, inch/mm, preset (+, -).
  • Battery CR2032.
  • Made of stainless steel.
  • Optional accessory: depth stop (part no. 6143), data output cable
  $417.04
  Add to cart INSIZE
• 

  DIGITAL INSIDE GROOVE CALIPER, .31-6″/8-150mm, IP67 dust/waterproof, no data output

  Part #: 1520-1501P
  • Resolution: .0005"/0.01mm.
  • Measure diameter of grooves inside small bores.
  • Buttons: on/off, zero, inch/mm, ABS/REL, hold Battery CR2032.
  • Made of stainless steel.
  • Optional accessory: depth stop (part no. 6143)
  $850.02
  Add to cart INSIZE
• 

  DIGITAL INSIDE GROOVE CALIPER, .56-6″/14-150mm, IP67 dust/waterproof, no data output

  Part #: 1520-150P
  • Resolution: .0005"/0.01mm.
  • Measure diameter of grooves inside small bores.
  • Buttons: on/off, zero, inch/mm, ABS/REL, hold Battery CR2032.
  • Made of stainless steel.
  • Optional accessory: depth stop (part no. 6143)
  $785.94
  Add to cart INSIZE